Skip to content
Need a Renovation Cost Estimate?

How Much Does It Cost to Repair Asphalt Paving?

$2 - $5
cost per square foot
$200 - $500
average repair cost (potholes, cracks, patches)
Get your renovation costs using Renotag's renovation cost calculator:

Asphalt repair is a necessary part of maintaining any paved surface, whether it’s a driveway, parking lot, or any pavement exposed to vehicles and weather. Understanding the costs associated with repairing asphalt can help you budget for this vital maintenance, ensuring your asphalt remains in good condition, prolonging its lifespan, and preventing more costly repairs or replacements down the line.

Key Takeaways

  • Cost Per Square Foot: Repairs can cost between $2 to $5 per square foot.
  • Average Repair Cost: Typical repairs like filling potholes, sealing cracks, and patching can range from $250 to $800.
  • Cost Factors: These include the extent of damage, repair method, and material costs.
  • DIY vs Professional: While some minor repairs can be DIY, professional hiring is recommended for more extensive or complex issues.

Asphalt Repair Cost Overview

The cost of asphalt repair can vary widely depending on the type of repair needed and the extent of damage. Below are some general costs to consider:

General Costs

  • Cost Per Square Foot: $2 – $5
  • Average Repair Costs (Potholes, Cracks, Patches): $250 – $800
  • National Average Cost: $500
  • Minimum Cost: $100
  • Maximum Cost: $1,500

Specific Repair Costs

  • Cold Patch: $2 – $4 per square foot
  • Hot Patch: $2 – $5 per square foot
  • Saw Cut Repairs: $4 – $12 per square foot
  • Infrared Repair: $2 – $6 per square foot

Detailed Repair Costs

Asphalt Repair Cost Per Square Foot

This table provides a detailed look at the cost per square foot for different types of asphalt repairs:

TypeAverage Cost Per Square Foot
Cold Patch$2 – $4
Hot Patch$2 – $5
Saw Cut$4 – $12
Infrared$2 – $6

Cost to Fill a Pothole

Filling a pothole is typically priced by the size of the pothole and the repair method used, usually falling within the general cost per square foot range.

Asphalt Patching Cost

Asphalt patching is necessary for areas where the surface has deteriorated significantly:

TypeAverage Cost Per 5’x5’ Patch
Cold Patch$50 – $100
Hot Patch$50 – $125
Saw Cut$100 – $300
Infrared Repair$50 – $150

Factors Influencing Asphalt Repair Costs

Several factors can affect the total cost of asphalt repairs:

  • Extent of Damage: More extensive or deeper damage will require more materials and labor, increasing costs.
  • Repair Method: Different methods can vary in cost, with some being more labor-intensive than others.
  • Material Prices: Costs for asphalt and other materials can fluctuate based on market conditions.

Consider DIY Asphalt Repair

For smaller repairs, such as minor cracks or small potholes, DIY asphalt repair can be a cost-effective option. However, for more significant damages or for results that last longer, professional repairs are recommended.

Hiring an Asphalt Repair Company

When hiring professionals, it’s essential to choose a reputable contractor. Ask about their experience, request references, and ensure they provide a detailed quote.


This guide should provide you with a clear understanding of what to expect when facing the need to repair asphalt paving. Always consider both immediate and long-term needs to ensure the best care for your paved surfaces. For further information on asphalt repair and maintenance, visit our detailed guide on asphalt driveway repair costs.

Asphalt Apron Repair Cost

The apron of your driveway, the section that connects to the street or main road, often requires repairs due to frequent use and exposure to elements. Repairing an asphalt apron generally involves filling cracks or patching holes, and costs can vary based on the extent of damage and the local pricing for labor and materials.

Asphalt Driveway Sinking

Sinking, or subsidence, of an asphalt driveway can occur due to poor base preparation, drainage issues, or the erosion of underlying materials. Repair typically involves removing the affected area, improving the base layer, and reapplying asphalt. The cost of repairing sinking issues will depend on the severity and size of the affected area but tends to be higher due to the extensive labor required.

Asphalt Sealing Cost

Sealing an asphalt driveway is a preventative maintenance measure that can help extend its lifespan by protecting it from the elements, oil spills, and UV damage. The cost of asphalt sealing ranges from $0.15 to $0.25 per square foot, with total costs depending on the driveway size and the type of sealant used.

Asphalt Overlay or Resurfacing

Asphalt overlay, or resurfacing, is a method of repairing an asphalt driveway by laying a new layer of asphalt over the existing one. This process can address multiple issues such as cracks, potholes, and surface degradation, providing a fresh, new surface. Costs typically range from $3 to $7 per square foot, making it a cost-effective solution for extensive surface damage.

Full Replacement or Repaving

When an asphalt surface is beyond simple repairs, a full replacement or repaving may be necessary. This process involves removing the existing pavement and laying down a new layer of asphalt. The cost for full replacement can vary widely, usually ranging from $7 to $13 per square foot, depending on factors like driveway size, disposal of old materials, and local labor rates.

DIY Asphalt Repair

For homeowners interested in DIY asphalt repair, small cracks and holes can be manageable projects. Using patching materials from local hardware stores, you can fill in minor cracks and small potholes. This section provides tips and guidelines for those looking to undertake such repairs themselves, emphasizing safety and effectiveness.

How to Repair an Asphalt Driveway

Repairing an asphalt driveway yourself involves several steps:

  1. Clean the Area: Remove debris and weeds from cracks and potholes.
  2. Apply Filler: Use a commercial filler for small cracks and cold patch material for larger potholes.
  3. Compact the Material: After filling, compact the material using a tamper or similar tool to ensure it’s packed tightly.
  4. Seal the Driveway: Once repairs are made, consider sealing the entire driveway to protect the new repairs and the existing asphalt.

Hiring an Asphalt Repair Company

When the damage to your asphalt driveway is severe or widespread, hiring a professional asphalt repair company is advisable.

Questions to Ask

Before hiring a contractor, consider asking the following questions to ensure you receive quality service:

  1. What is your experience with asphalt repair?
  2. Can you provide references or before-and-after photos of past projects?
  3. What repair method do you recommend for my driveway, and why?
  4. What is included in your quote?
  5. How long will the repair take, and what warranty do you offer on your work?

Selecting a qualified professional can ensure that your driveway repairs are durable and aesthetically pleasing, adding to the curb appeal and functionality of your property. For additional guidance on selecting a contractor, visit our guide on how to choose an asphalt repair company.

Renotag's renovation cost calculator being used by a person to price their home renovation costs.
social proofs renotag
5K+ homeowners trust Renotag

Your renovation cost is waiting

The world's first renovation cost calculator.

Table of Contents

Calculate your reno price

Add your project details, choose your finishes, and get a price for your project – no contractor needed until construction time.