Skip to content
Need a Renovation Cost Estimate?

How Much Does It Cost to Install Driveway Pavers?

Get your renovation costs using Renotag's renovation cost calculator:

Key Takeaways

Cost Per Square Foot$10 – $30
1-Car Driveway Cost$2,900 – $8,600
2-Car Driveway Cost$5,700 – $17,200
Materials Cost Range$4.00 – $20.00 per square foot
Labor Cost Range$6.25 – $10.90 per square foot
Paver TypesBrick, Permeable, Cobblestone, Concrete
Longevity25 to 75 years
DIY Cost$4 – $6 per square foot for materials

$10 – $30 Cost Per Square Foot Installed

The cost of installing driveway pavers can vary significantly based on the type of pavers selected and the complexity of the installation. As a general rule, expect to pay between $10 and $30 per square foot.

$2,900 – $8,600 Average 1-Car Paver Driveway Cost

For a standard 1-car paver driveway, costs typically range from $2,900 to $8,600. This range accounts for various factors, including labor, materials, and regional economic conditions.

$5,700 – $17,200 Average 2-Car Paver Driveway Cost

A 2-car paver driveway will cost approximately $5,700 to $17,200. This price range reflects the increased surface area and the labor and materials required to complete the installation.

Driveway Pavers Cost

Brick Driveway Cost

SizeAverage Cost
12’ x 24’ (1-Car)$2,900 – $7,200
24’ x 24’ (2-Car)$5,700 – $17,200
36’ x 24’ (3-Car)$8,600 – $25,900
10’ x 20’ Car Turn-Around$2,000 – $6,000

Average Paver Driveway Cost Calculator

To provide a more specific estimation, several factors should be considered, such as the type of paver, labor costs, and additional features like edging.

Cost To Install Paver Driveway

Driveway Pavers Cost Per Square Foot

ItemCost Per Square Foot
Pavers$2 – $17
Base Materials$2 – $3
Labor$6 – $10
Total Install Cost$10 – $30

The overall installation cost per square foot ranges from $10 to $30, including pavers, base materials, and labor.

Labor Cost to Lay Block Paving Driveway

OperationCost Per Square Foot
Labor$4.50 – $7.00
Excavation$0.80 – $1.50
Dumping$0.30 – $0.50
Fueling$0.30 – $0.70
Delivery$0.00 – $0.70
Pallet Exchange Fees$0.05 – $0.20
Clean Up$0.15 – $0.30
Total Labor Cost$6.25 – $10.90

Labor costs for laying a block paving driveway typically range from $4.50 to $7.00 per square foot, with additional charges for excavation, dumping, fueling, delivery, and cleanup.

Paver Driveway Base Materials Cost

MaterialCost Per Square Foot
Pavers$2.00 – $17.00
Geotextile Fabric$0.30 – $0.50
Class II Road Base$1.20 – $1.60
Bedding Sand$0.30 – $0.40
Edging / Concrete Bond Beam$0.10 – $0.20
Joint Polymeric Sand$0.10 – $0.30
Total Materials Cost$4.00 – $20.00

The cost of base materials for a paver driveway ranges from $4.00 to $20.00 per square foot, depending on the types and quantities of materials used.

Paver Driveway Costs By Type

The cost of different types of paver driveways can vary based on the material and installation specifics.

Type / MaterialCost Per Square FootTotal Cost Installed
Brick$10 – $25$5,500 – $14,500
Permeable$8 – $30$4,000 – $17,000
Cobblestone$20 – $50$12,000 – $30,000
Concrete$10 – $20$5,500 – $11,500
Stone$10 – $30$5,500 – $18,000
Grass$10 – $20$5,500 – $11,500
Porcelain$15 – $30$8,500 – $18,000
Rubber$8 – $15$4,500 – $8,500

Brick Driveway Cost

Brick pavers are a classic option for driveways, providing a traditional appearance and durable surface.

Permeable Paver Driveway Cost

Permeable pavers help manage stormwater by allowing it to seep through the gaps between pavers, reducing runoff.

Cobblestone Driveway Cost

Cobblestone driveways offer a historic and high-end look but come at a higher price point due to the material and labor costs.

Concrete Driveway Pavers Cost

Concrete pavers are versatile and can be colored, stamped, or treated to mimic other materials like stone or brick.

Paving Stone Driveway Cost

Natural stone pavers provide an elegant and durable driveway surface, with costs varying based on the type of stone used.

Grass Driveway Pavers Cost

Grass pavers integrate vegetation within the driveway surface, offering an eco-friendly solution that reduces heat absorption and stormwater runoff.

Interlocking Driveway Pavers Cost

Interlocking pavers are designed to fit together easily, making installation quicker and providing a stable, durable surface.

Other Driveway Paver Options

Options such as rubber and porcelain pavers provide specific benefits like improved traction and modern aesthetics.

Driveway Edging

Edging options help contain pavers, maintain shape, and provide a finished look. Costs vary based on the materials and installation.

Paver Driveway Cost vs. Concrete

When comparing paver driveways to concrete driveways, several factors must be considered:

FeaturePaversConcrete Slab
Cost$10 to $30 per square foot$4 to $8 per square foot
SkillRequires a stonemason or bricklayerSub-grade must be installed by a contractor
Install Time3 to 5 days; can be used immediately1 to 3 days; requires 1-week curing period
StrengthAverage 8,000 PSI3,500 to 4,000 PSI
Design FeaturesLots of colors, styles, and shapesCan be colored, stamped, stained, or stenciled for additional costs
MaintenanceClearing leaves, tree debris, and snow; weed-pullingNeeds yearly power washes, and sealing every 1 to 3 years
SealingStain-resistant but can be sealedCan be painted or sealed
LongevityLasts 25 to 75 yearsLasts 20 to 30 years; often only a 1-year warranty
DurabilityCan chip and crack during freeze-thaw cycles; individual pavers can be replacedProne to cracking during freeze-thaw cycles; entire slabs may need replacement
Return on Investment69% return on investmentUsually no ROI
Environmental FactorsSome water soaks into the ground; eco-friendlyWater runoff goes into storm drains
Slipping DangerNot as slippery when wetSlippery when wet
ComfortLower heat absorption – cooler under bare feetHot surface in high temperatures

Cost To Replace Driveway With Pavers

Replacing an existing driveway with pavers involves several cost factors:

ProjectCost Per Square Foot
Remove Concrete or Asphalt Driveway$2 – $6
Install New Paver Driveway$10 – $30

Cost To Extend or Widen Driveway with Pavers

ProjectAverage Cost
Extend Driveway 5′ longer$1,200 – $3,000
Widen Driveway 3′ on each side$1,400 – $3,600

Can You Put Pavers Over a Concrete Driveway?

Pavers can generally be installed over a concrete driveway, provided the concrete is in good condition and proper preparatory work is done.

Pros and Cons of Paver Driveways


  1. Durability: Pavers are highly durable and offer a long lifespan.
  2. Aesthetics: Available in numerous colors, styles, and shapes, pavers provide a versatile design that can complement any home.
  3. Maintenance: Individual pavers can be easily replaced if damaged, reducing long-term maintenance costs.


  1. Cost: Paver driveways can be more expensive to install compared to other materials.
  2. Weeds and Settling: Without proper maintenance, weeds may grow between pavers, and settling can occur over time.

Driveway Paver FAQs

How Long Do Paver Driveways Last?

Paver driveways typically last between 25 to 75 years, depending on the materials used and proper maintenance.

How Much Does Driveway Paver Lighting Cost?

Driveway paver lighting costs can range from $50 to $200 per light, depending on the complexity of the installation and the type of lighting chosen.

What Colors Do Driveway Pavers Come In?

Driveway pavers are available in a wide range of colors, including natural earth tones, reds, greys, and custom hues to match various aesthetic preferences.

How Thick Do Pavers Need to Be for a Driveway?

For driveway applications, pavers should generally be at least 2 3/8 inches thick to support vehicular traffic and ensure durability.

Should Driveway Pavers Be Sealed?

Sealing pavers is recommended to protect them from stains, enhance color, and extend their lifespan. However, some pavers are designed to be stain-resistant without sealing.

What Are the Least Expensive Driveway Pavers?

Concrete pavers are typically the least expensive option, costing between $10 and $20 per square foot installed.

How Much Does a Heated Paver Driveway Cost?

A heated paver driveway can significantly increase installation costs, with prices ranging from $12 to $25 per square foot, depending on the heating system used.

DIY Brick Paver Driveway Cost

For those interested in a DIY approach, here are the average costs associated with installing a brick paver driveway yourself:

Tools & MaterialsAverage CostDescription
Tools$50 – $160Stakes, Spikes, Marking Chalk, Rubber Mallet, Rake, Broom, Manual Tamper
Materials (Per SF)$4 – $6Pavers, Gravel, Bedding and Polymeric Sand, Pre-Emergent Herbicide, Geotextile Fiber, Sealer, Edging
Paver Delivery$0 – $670Depends on load size and delivery distance
Excavation/Demolition (Per SF)$1 – $3Depends on area size, labor costs, and dump fees
Dump Fees (Per Ton)$40 – $60Hauling away old concrete, dirt, and debris
Equipment Rental (Per Day)$200 – $600Costs vary based on equipment type and rental duration

How To Install Driveway Pavers

Proper installation of driveway pavers involves several key steps:

  1. Planning: Outline the driveway dimensions and plan the design.
  2. Excavation: Remove existing driveway materials and excavate the area to the required depth.
  3. Base Installation: Install a base layer of gravel or crushed stone, followed by a layer of bedding sand.
  4. Laying Pavers: Arrange pavers according to the desired pattern.
  5. Edging and Compaction: Secure the edges and use a compactor to set the pavers firmly.
  6. Finishing: Sweep joint sand into the gaps between pavers and seal the surface if desired.

Hiring a Driveway Paver Installer

When hiring a professional installer, it’s essential to ask the right questions to ensure quality and reliability.

Questions to Ask Pros

  1. Experience: How many years have you been installing paver driveways?
  2. Portfolio: Can you provide examples of previous work?
  3. Licensing and Insurance: Are you licensed and insured?
  4. References: Can you provide references from past clients?
  5. Warranty: Do you offer a warranty on the installation and materials?
  6. Timeline: What is the estimated timeline for completion?
  7. Cost Estimate: Can you provide a detailed written estimate?
Renotag's renovation cost calculator being used by a person to price their home renovation costs.
social proofs renotag
5K+ homeowners trust Renotag

Your renovation cost is waiting

The world's first renovation cost calculator.

Table of Contents

Calculate your reno price

Add your project details, choose your finishes, and get a price for your project – no contractor needed until construction time.