Key Takeaways
| Main Points | Details |
|---|---|
| Cost Per Linear Foot Installed | $1.50 – $3.00 |
| Average Total Cost (100-200 LF) | $150 – $600 |
| Factors Affecting Cost | Materials, Labor |
| Labor Cost Range | $1 – $7 per linear foot |
| Material Types | Aluminum, Galvanized Steel, Copper, Plastic/Vinyl |
Cost To Install A Drip Edge
$1.50 – $3.00 Cost Per Linear Foot Installed
The cost to install a drip edge typically ranges from $1.50 to $3.00 per linear foot. This includes the cost of materials and labor.
$150 – $600 Average Total Cost To Install (100-200 LF)
For an average home requiring 100 to 200 linear feet of drip edge, the total installation cost will range from $150 to $600.
Drip Edge Cost
| Installation Type | Cost Per Linear Foot | Average Cost Installed* |
|---|---|---|
| Installing drip edge during roof replacement | $1.50 – $3.00 | $150 – $600 |
| Installing drip edge on existing roof | $5.00 – $9.00 | $500 – $1,800 |
| Installing gutter apron | $2.00 – $5.00 | $200 – $1,000 |
| Installing rake edges | $3.00 – $5.50 | $300 – $1,100 |
*Note: The average cost installed includes both materials and labor.
Drip Edge Cost Factors
Several factors influence the cost of installing a drip edge.
Drip Edge Cost Per Linear Foot
| Factor | Cost Per Linear Foot |
|---|---|
| Materials | $0.50 – $1.00 |
| Labor | $1.00 – $2.00 |
Total Cost To Install: $1.50 – $3.00
Labor Cost To Install A Drip Edge
| Installation Type | Labor Cost Per Linear Foot |
|---|---|
| During roof replacement / new roof build | $1 – $2 |
| Retrofitting on existing roof | $3 – $7 |
Drip Edge Prices By Material
| Material | Price Per Linear Foot |
|---|---|
| Aluminum | $0.50 – $1.00 |
| Galvanized steel | $0.50 – $1.25 |
| Copper | $4.00 – $9.50 |
| Plastic / vinyl | $0.50 – $1.00 |
Drip Edge Cost By Style
| Type | Material Cost Per Linear Foot | Details |
|---|---|---|
| Type-C | $0.50 – $1.00 |
|
| Type-D | $0.50 – $1.00 |
|
| Type-F | $0.75 – $2.50 |
|
Other Types Of Roof Drip Edge
Other Types Of Roof Drip Edge Flashing Costs
| Flashing Type | Cost Per Linear Foot |
|---|---|
| Gutter apron | $2.00 – $5.00 |
| Rake edge / gable flashing | $3.00 – $5.50 |
Gutter Apron Cost
Gutter aprons, also known as gutter flashings, typically cost between $2 and $5 per linear foot.
Rake Edge Vs. Drip Edge
Rake edges are a type of flashing installed along the gable ends (rake edges) of a roof, costing approximately $3 to $5.50 per linear foot. In contrast, standard drip edges are installed along the eaves and are slightly less expensive.
What Is A Drip Edge On A Roof?
A drip edge is a metal flashing installed at the edges of a roof. Its primary function is to direct water away from the fascia and into the gutters, significantly reducing the risk of water damage to the roof and underlying structures.
Why Do You Need A Drip Edge?
Installing a drip edge offers several benefits:
- Prevents water from seeping into the roof decking and fascia.
- Protects the roof’s edge from ice dams during winter.
- Enhances the overall durability of the roof system.
- Helps prevent pest infestations by sealing gaps at the roof edge.
Do Metal Roofs Need A Drip Edge?
Yes, metal roofs also require a drip edge to ensure proper water drainage and to prevent water from penetrating the roof’s substructure. The cost and materials for a drip edge on a metal roof are generally similar to those for other types of roofs.
When To Install A Drip Edge?
Drip edges should be installed during the initial roof installation or during a roof replacement. Retrofitting a drip edge on an existing roof is possible but can be more labor-intensive and costly.
How Much Drip Edge Do I Need?
To calculate the length of drip edge needed, measure the total perimeter of your roof, including the eaves and gable ends. This measurement will give you the total linear footage required.
How Much Overlap Should Drip Edge Have?
Each piece of drip edge should overlap the adjacent piece by at least 2 inches. This overlap ensures continuity and prevents water from seeping through the joints.
How Long Is A Piece Of Drip Edge?
Standard pieces of drip edge are usually sold in 10-foot lengths, but you can cut them to fit the specific dimensions of your roof.
What Is The Recommended Gauge Of Drip Edge?
The typical gauge for drip edges ranges from 28 to 32 gauge, with lower gauges indicating thicker and more durable material. It’s essential to choose a gauge that suits your climate and the specific needs of your roof.
Finding And Hiring A Roof Repair Contractor
When considering drip edge installation, hiring a qualified roofing contractor can ensure a job well done. Here are some steps to take:
Questions To Ask
- Experience: How many years have you been installing drip edges?
- References: Can you provide references from recent clients?
- Insurance: Are you fully insured for property damage and worker’s compensation?
- Cost Estimates: Can you provide a detailed written estimate?
- Warranty: Do you offer a warranty for your work, and what does it cover?
By asking these questions and choosing a qualified professional, you’ll ensure your roof gets the protection it needs.
