Skip to content
Need a Renovation Cost Estimate?

How Much Does A Well Pump Cost To Replace Or Install? (2024)

Submersible Well Pump Cost Installed
Jet Well Pump Cost Installed
Get your renovation costs using Renotag's renovation cost calculator:

Key Takeaways

Key Takeaways

Average Well Pump Cost to ReplaceThe national average cost for replacing a well pump is $1,800, with costs ranging from $200 to $20,000.
Well Pump Cost By TypeSubmersible pumps cost $1,000–$2,500; jet pumps cost $400–$1,400; constant pressure pumps cost $2,000–$5,000; and more.
Well Pump Installation Cost FactorsFactors affecting costs include type of pump, depth of well, labor, and additional components.
Well Pump Repair CostsRepairing well pump parts such as pressure tanks, switches, and motors can range from $25 to $2,000.
Signs A Well Pump Needs To Be ReplacedIndicators include no water flow, reduced water pressure, and unusual noises from the pump.
Submersible well pump installed in the ground | How Much Does A Well Pump Cost To Replace Or Install?
Submersible well pump installed in the ground | How Much Does A Well Pump Cost To Replace Or Install?

Submersible Well Pump Cost Installed

Submersible pumps are often used in deep wells and typically cost between $1,000 and $2,500, including installation. These pumps are submerged in water and are known for their efficiency and reliability. The actual cost may vary based on the depth of the well and specific installation requirements.

Jet Well Pump Cost Installed

Jet pumps can be used for both deep and shallow wells. The cost to install a jet pump ranges from $400 to $1,400. Deep well jet pumps tend to be more expensive due to their complexity and stronger motors.

Average Well Pump Cost to Replace

Average Well Pump Replacement Cost
National Average Cost$1,800
Minimum Cost$200
Maximum Cost$20,000
Average Range$1,000 to $2,500

The national average cost to replace a well pump hovers around $1,800. However, factors such as the type of pump, the depth of the well, and labor costs can cause significant variations. Basic hand pumps may cost as little as $200, whereas sophisticated systems like windmill water pumps can reach up to $20,000.

Well Pump Cost By Type

Pump TypeAverage Installed Cost
Submersible Pump$1,000–$2,500
Jet Pump (Deep Well)$500–$1,400
Jet Pump (Shallow Well)$400–$1,000
Constant Pressure Pump$2,000–$5,000
Hand Pump$200–$2,000
Solar Pump$1,500–$6,500
Windmill Water$4,000–$20,000
Brand new well pump installed by newly built farmhouse | How Much Does A Well Pump Cost To Replace Or Install?
Brand new well pump installed by newly built farmhouse | How Much Does A Well Pump Cost To Replace Or Install?

The type of well pump significantly impacts the overall replacement cost. Submersible pumps and jet pumps are among the most commonly used, while hand and solar pumps offer more eco-friendly options.

Submersible Well Pump Cost

Submersible well pumps are designed to be underwater and are used for deep wells. Their costs range from $1,000 to $2,500, depending on the well’s depth and the pump’s capacity. These pumps are preferred for their efficiency and longer lifespan.

Jet Well Pump Cost

Jet pumps are versatile and can be used for both deep and shallow wells. Deep well jet pumps cost between $500 and $1,400, while shallow well jet pumps range from $400 to $1,000. Installation complexity and required accessories, like ejector assemblies for deep wells, can affect overall costs.

Constant Pressure Pump Cost

Constant pressure pumps provide a steady water pressure and adjust to variable water usage. These sophisticated systems range from $2,000 to $5,000 installed. Their higher cost is justified by the convenience and performance they offer.

Hand Pump Cost

Hand pumps are simple, manual devices and range from $200 to $2,000. They are often used in off-grid locations or as backup systems. Installation is generally less complex, which keeps costs lower.

Eco-Friendly Pump Costs

Eco-friendly pumps, such as solar and windmill water pumps, are increasingly popular. Solar pumps cost between $1,500 and $6,500, depending on the size and power needs of your well. Windmill water systems are more expensive, ranging from $4,000 to $20,000. These options can provide sustainable water solutions but usually come with higher upfront costs.

Well Pump Installation Cost Factors

Several factors influence the cost of installing or replacing a well pump. These include:

  • Type of Pump: Costs vary widely based on the pump type (e.g., submersible vs. jet).
  • Depth of Well: Deeper wells require more powerful pumps and complex installation.
  • Labor Costs: Labor rates differ by region and can significantly impact total expenses.
  • Additional Components: Items like pressure tanks, control boxes, and piping add to the overall cost.

Well Pump Repair Costs

ComponentAverage Replacement CostDescription
Pressure Tank$500–$1,000Stores water and maintains pressure in the system
Pressure Switch$25–$100Turns the pump on/off based on pressure changes
Tank Bladder$50–$100Separates water and air in the pressure tank
Pump Motor$500–$1,000Powers the pump
Booster Pump$1,000–$2,000+Increases system water pressure
Old well pump in need of replacement | How Much Does A Well Pump Cost To Replace Or Install?
Old well pump in need of replacement | How Much Does A Well Pump Cost To Replace Or Install?

Repairing essential parts of a well pump is often a cost-effective alternative to full replacement. Components such as pressure switches, tank bladders, and motors can be replaced, with costs ranging from $25 to well over $2,000 in some cases.

Signs A Well Pump Needs To Be Replaced

Recognizing when your well pump needs replacement can save you from potential water supply issues. Common signs include:

  • No Water Flow: The most obvious sign of a pump failure.
  • Low Water Pressure: Indicates the pump is not performing efficiently.
  • Unusual Noises: Strange sounds could suggest mechanical wear or damage.
  • Air Spitting From Faucets: Often a sign of a damaged pump or pressure tank.

Well Pump FAQs

How Long Does A Well Pump Last?

On average, a well pump can last between 8 to 15 years, depending on the type and usage. Regular maintenance can extend the lifespan.

How Long Does It Take To Replace A Well Pump?

Replacing a well pump typically takes between 3 to 6 hours, depending on the complexity of the installation and the type of pump.

What Is The Best Type Of Well Pump?

The best type of well pump depends on your specific needs, such as well depth and water demand. Submersible pumps are great for deep wells, while jet pumps are suitable for both shallow and deep wells.

Why Would A Well Pump Fail?

Well pumps can fail due to several reasons, including mechanical wear, electrical issues, clogged pipes, and low water levels in the well.

How Long Can You Run A Well Pump?

A well pump should not run continuously. Most modern pumps are designed to operate intermittently to avoid overheating and mechanical failure.

How Does A Well Pump Work?

A well pump extracts water from the ground through a pipe system, delivering it to a pressure tank, and then to your faucets. It operates based on pressure levels monitored by a pressure switch.

Getting Estimates From Well Pump Companies

When seeking estimates from well pump companies, it is essential to gather multiple quotes and compare them carefully. Ensure each quote covers all potential costs, including labor, materials, and additional components.

Questions To Ask A Well Pump Installer

  • Experience: How many years have you been installing well pumps?
  • Warranty: What kind of warranty do you offer for your work and the pump?
  • References: Can you provide references from previous clients?
  • Timeline: How long will the installation process take?
  • Additional Costs: Are there any potential additional costs that I should be aware of?

By asking these questions, you can make a more informed decision and ensure a seamless installation or replacement process.

Renotag's renovation cost calculator being used by a person to price their home renovation costs.
social proofs renotag
5K+ homeowners trust Renotag

Your renovation cost is waiting

The world's first renovation cost calculator.

Table of Contents

Calculate your reno price

Add your project details, choose your finishes, and get a price for your project – no contractor needed until construction time.